-
Bump Steer Spacers are designed to get rid of that pesky bump steer on your lowered vehicle. These Bump Steer Spacers are for 15" or larger wheels. They fit between the ball joints and the bottom of the strut assemblies. They maintain correct alignment and geometry on lowered Z cars. They are made with quality t6061 aluminum castings. These will prevent the steering wheel from turning on its own when you press the brakes or drive over a bump in the road.
Note: if you are running 15x8 inch wheels with 0 offset these bump steer spacers will cause your tie rod to hit the inside of the wheel. They will work with Watanabe 15x9.5 RS series with a -13 offset wheels. will not fit 15x9.5 -19 Watanabe R Types
this Bumpster spacer will cause your lower control arm to move a little closer to the rotor. If you are using stock brakes, that’s fine but if you are using our Wilwood upgrades, the Rotor will Touch The stock lower control arm. Your options are to grind down the lower control arm or get an adjustable lower control arm from us.
